Home Events Course Introduction training in Simcenter STAR-CCM+

Introduction training in Simcenter STAR-CCM+

We hereby invite you to participate in Volupes introduction training in Simcenter STAR-CCM+. The training is divided into four half days (four sessions). 

Training agenda

In this training you learn how to navigate in the software, as well as understanding the fundamentas behind this multi-physics tool. The sessions are alternating between theory, practical examples and work shops.

 

Training overview

Session 1: First a live demonstration of how to set up a case in Simcenter STAR-CCM+ will be provided. General theory for CFD simulations will be covered, and for the work shops we will focus on the embedded CAD tool, 3D-CAD, to create our own geometries and fluid volume.

Session 2: The strong tool Surface wrapping, together with meshing, will be in focus for this session both in theory and with work shops.

Session 3: In the third session you will run a steady state simulation, by setting up a work shop simulation. Post-processing will be discussed and also practiced.

Session 4: In the last session we will cover transient simulations, but in theory and by a work shop (using overset mesh). There is also some room for customized material, if there is something you are extra interested in.

Time schedule (per day): 8.30-12:00 CET
Cost: 1400 EUR

Prerequisites: Simcenter STAR-CCM+ installed (preferable), engineering background (previous experience of CFD simulations will ease the learning process).

If you are interested in participating in this Volupe course, please contact the instructor of the course Johan Bernander (+46 702 951 831or the Volupe technical lead Carl Stenson (+46 766 336 599).

  • 00

    days

  • 00

    hours

  • 00

    minutes

  • 00

    seconds

Hourly Schedule

Day 1

08.30 - 12.00
Session 1
First a live demonstration of how to set up a case in Simcenter STAR-CCM+ will be provided. General theory for CFD simulations will be covered, and for the work shops we will focus on the embedded CAD tool, 3D-CAD, to create our own geometries and fluid volume.
Speakers:
Johan Bernander

Day 2

08.30 - 12.00
Session 2
The strong tool Surface wrapping, together with meshing, will be in focus for this session both in theory and with work shops.
Speakers:
Johan Bernander

Day 3

08.30 - 12.00
Session 3
In the third session you will run a steady state simulation, by setting up a work shop simulation. Post-processing will be discussed and also practiced.
Speakers:
Johan Bernander

Day 4

08.30 - 12.00
Session 4
In the last session we will cover transient simulations, but in theory and by a work shop (using overset mesh). There is also some room for customized material, if there is something you are extra interested in.
Speakers:
Johan Bernander
Johan Bernander
Johan Bernander
Application Suppot engineer

Book Event

By booking this event you can attend all occurrences. Some of them are listed below but there might be more.
2022-12-05 - 2022-12-08
EUR
Available Tickets: 100
The ticket is sold out for some of dates. You can try another ticket or another date.

Date

Dec 05 - 08 2022

Time

08:30

Local Time

  • Timezone: America/New_York
  • Date: Dec 05 - 08 2022
  • Time: 02:30

Cost

1,400 EUR
Category
VOLUPE AB

Organizer

VOLUPE AB
Phone
070-646 60 67
Email
info@volupe.com
Website
https://volupe.com

Sponsor

REGISTER

Speaker

QR Code
en_USEnglish